solutions

Repair products

The selection of the products and their implementation is adapted to each specific case. Our experimented operators, trained for many years for this job,perform all your works of chocking, grouting and injection..

Mechanical repairs adapted to metallic surfaces

METAL REPAIR FLUID (METAL-TECH FG)

Fluid synthetic metal for cold refilling, surfacing, anti-skid, non-slip safety and chocking.

See technical data sheet

METAL REPAIR FLUID XF (METAL-TECH XRG)

METAL REPAIR FLUID XF is a fast hardening synthetic metal, allowing a cold repair of all types of equipment. The re-commissioning can occur within minutes following the application. It is a safe, easy to use product, bonding to all surfaces, ideal for emergency interventions.

See technical data sheet

METAL REPAIR PASTE (METAL-TECH EG)

High performances synthetic metal for cold repairing and refilling of machines and equipment. Perfect bonding to ferrous and nonferrous metals, glass, some plastics and composites. It can be machined like metals but also allows to intervene on-site and to get repairs keeping the original dimensions by molding and casing, non-shrink.

See technical data sheet

Ceramic repairs adapted to metallic surfaces exposed to abrasion and impact

CERAMIC REPAIR FLUID (CÉRAMI-TECH FG)

The CERAMIC REPAIR FLUID: solid, adheres to all metal surfaces, mechanically and chemically resistant.

See technical data sheet

HEAVY DUTY CERAMIC PASTE (CÉRAMI-TECH HG)

Protection against severe abrasion, chemical and electrolytic anticorrosion.

See technical data sheet

CERAMIC REPAIR PASTE (CÉRAMI-TECH EG)

For cold refilling, for the protection of metals against corrosion and abrasion. CERAMIC REPAIR PASTE is a ceramic reinforced polymer, solid, adhering to all metallic surfaces, mechanically and chemically resistant.
See technical data sheet

SUPER FLOW CERAMIC FLUID (CÉRAMI-TECH CR)

Antifriction and anticorrosion coating for the equipment dedicated to the fluids and gases transport. Protection against electrolytic corrosion, efficiency improvement.

Rubber repair system adapted to metallic and rubber surfaces

RESIFLEX 401 GP PUTTY (Flexi-Tech 60 et 80 EG)

RESIFLEX 401 GP PUTTY is a urethane two components elastomer system, cold vulcanizing, which allows to repair, protect the industrial equipment, insulate electrically and from vibrations and noises, and mold parts…
See technical data sheet

Chemical coatings

RESICHEM 506 ALUPRIME (CORRO-TECH GP)

RESICHEM 506 ALUPRIME is applicable on surfaces roughly prepared and consistent ancient base, through the penetration and anticorrosion properties of its components. It can be used for practically all the industrial and atmospheric environments, it ages well and is very resistant to chemical attacks.

See technical data sheet

Chemical protection steel and concrete

RESICHEM 511 UCEN (CHEMI-TECH UC)

RESICHEM 511 UCEN is a high performance anticorrosion coating. Designed for the protection of retentions (metallic, cementitious), drains, sumps, pumps concrete base, pads, supports, internal surfaces of tanks and water cylinder, internal and external surfaces of pumps and valves bodies.

See technical data sheet

Repair for wood

POLYESTER WOODFILLER (TIMBA-TECH)

POLYESTER WOODFILLER allows to do a repair and/or protection in half an hour. Repair of wood products, polyester products, making of molds. Adheres to all materials. Can be prepared in all circumstances, from fluid state for castings to paste state for rebuilding. It’s an economical and versatile repair product.

See technical data sheet

Tightness coating roofs and floors

CONCRETE PATCH REPAIR (FLOOR-TECH PR)

Three components epoxy mortar, to repair damaged and attacked concrete, it is the universal mortar for quick repair. Adheres without primer to many building materials and is non-shrink. It hardens very quickly, allowing fast repairs with a minimal disruption of the surrounding activity.

POLYROOF AW (SEAL-TECH AW)

Acrylic coating, fibrous solvent, for snapshot tightness under all weather, on all materials. Instant tightness coating, to resolve the roofs problems as leaking gutter, wall angles, glass roofs, chimney stacks and flashings, damaged seals, fibro-porous, ancient multilayers. Provides a durable and soft tightness for all your roofs problems, whether they are made of metal, concrete, bitumen, glass… Ideal solution to the leakage problems.

See technical data sheet